Updated Sep-2023 Test Engine to Practice Test for 300-730 Exam Questions and Answers!
Implementing Secure Solutions with Virtual Private Networks Certification Sample Questions and Practice Exam
Preparation Phase
Numerous resources are available to the applicants who are looking to ace the Cisco 300-730 exam. The specialists can find both the official training materials and various learning tools by other reputable platforms to help them to achieve success in the test. To get started with their preparation phase, the students can check the official training course: Implementing Secure Solutions with Virtual Private Networks. It explores the steps involved in setting, implementing, supporting, and monitoring enterprise VPN solutions. It combines practical experiences and instructor-led lessons to equip the learners with the knowledge and skills that are required for troubleshooting and deploying IPsec, DMVPN, remote access VPN, and FLexVPN for creating encrypted and secure data increased privacy and remote accessibility. After completing this training option, the individuals will get 40 CE credits toward recertification.
NEW QUESTION # 63
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)
- A. Add NHRP redirects on the hub.
- B. Add NHRP redirects on the spoke.
- C. Add NHRP shortcuts on the hub.
- D. Disable EIGRP next-hop-self on the hub.
- E. Enable EIGRP next-hop-self on the hub.
Answer: A,E
Explanation:
DMVPN disables the EIRGP next-hop-self with "no ip next-hop-self eigrp xxx" in DMVPN phase 2, and to go from Phase 2 to 3 you need use the NHRP protocol, and again enable EIRGP next-hop-self with "ip next-hop-self eigrp 134" under the tunnel interface https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html#GUID-BF561439-BCC0-4AAF-80D9-1F7876CB7B81
NEW QUESTION # 64
Refer to the exhibit.
The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem?
- A. preshared key
- B. ikev2 proposal
- C. peer identity
- D. transform set
Answer: C
NEW QUESTION # 65
Refer to the exhibit.
Based on the configuration output, what is the VPN technology?
- A. L2VPN
- B. multicast VPN
- C. DMVPN
- D. site-to-site
Answer: A
NEW QUESTION # 66
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-connect
- B. auto-run
- C. auto-upgrade
- D. auto-start
Answer: D
NEW QUESTION # 67
Refer to the exhibit.
DMVPN spoke-to-spoke traffic works, but it passes through the hub, and never sends direct spoke-to-spoke traffic. Based on the tunnel interface configuration shown, what must be configured on the hub to solve the issue?
- A. Enable NHRP redirect.
- B. Enable split horizon.
- C. Enable NHRP shortcut.
- D. Enable IP redirects.
Answer: C
NEW QUESTION # 68
Refer to the exhibit.
An IPsec Cisco AnyConnect client is failing to connect and generates these debugs every time a connection to an IOS headend is attempted. Which action resolves this issue?
- A. Correct the integrity setting.
- B. Correct the DH group setting.
- C. Correct the PFS setting.
- D. Correct the encryption setting.
Answer: B
NEW QUESTION # 69
Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?
- A. The XML profile is not configured correctly for the affected users.
- B. Client software updates are not supported with IKEv2.
- C. Client services are not enabled.
- D. The new client image does not use the same major release as the current one.
Answer: C
NEW QUESTION # 70
Refer to the exhibit.
Which component must be configured on routers for a GETVPN deployment work properly?
- A. Customer 1 CE1: Key Server - R1 and Customer 1 CE2: Group Members
- B. PE3: Key Server - Customer 2 CEs: Group Members
- C. R1: Key Server - Customer 1 CEs: Group Members
- D. PE3: Key Server - all CEs: Group Members
Answer: B
NEW QUESTION # 71
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$DfltlkeldentityS*
- B. *$AnyConnectClient$*
- C. *$SecureMobilityClient$*
- D. *$RemoteAccessVpnClient$*
Answer: B
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION # 72
Which feature of GETVPN is a limitation of DMVPN and FlexVPN?
- A. design for use over public or private WAN
- B. no requirement for an overlay routing protocol
- C. enabled use of ESP or AH
- D. sequence numbers that enable scalable replay checking
Answer: B
NEW QUESTION # 73
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?
- A. DMVPN Phase 2
- B. GETVPN
- C. DMVPN Phase 3
- D. FlexVPN
Answer: D
Explanation:
(FlexVPN supports the use of Dynamic Routing protocols such as EIGRP, BGP and OSPF. FlexVPN also has the ability to advertise routes in the IKEv2 SA's. In order to do this we must configure an IKEv2 Authorization Policy,)
NEW QUESTION # 74
Refer to the exhibit.
The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem?
- A. preshared key
- B. ikev2 proposal
- C. peer identity
- D. transform set
Answer: C
NEW QUESTION # 75
Refer to the exhibit.
The customer must launch Cisco AnyConnect in the RDP machine. Which IOS configuration accomplishes this task?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: B
NEW QUESTION # 76
Refer to the exhibit.
The DMVPN spoke is not establishing a session with the hub. Which two actions resolve this issue? (Choose two.)
- A. Change the nhrp authentication key on the spoke to cisco123.
- B. Change the ISAKMP policy authentication on the spoke to pre-shared.
- C. Change the transform set to mode tunnel.
- D. Change the spoke nhs to 172.16.18.1 and the nbma to 10.0.0.1.
- E. Change the ISAKMP key address on the spoke to 0.0.0.0.
Answer: A,E
NEW QUESTION # 77
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN server to authorize groups by using an IPv6 external AAA
- B. FlexVPN server to authenticate IPv6 peers by using EAP
- C. FlexVPN client profile for IPv6
- D. FlexVPN server for an IPv6 dVTI session
Answer: C
NEW QUESTION # 78
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?
- A. DMVPN Phase 3
- B. DMVPN Phase 2
- C. GETVPN
- D. FlexVPN
Answer: A
NEW QUESTION # 79
Which feature allows a DMVPN Phase 3 spoke to switch to an alternate hub when the primary hub is unreachable?
- A. per-tunnel jitter probes
- B. backup NHS
- C. NHRP shortcut
- D. multicast PIM
Answer: B
Explanation:
The DMVPN-Tunnel Health Monitoring and Recovery (Backup NHS) feature allows you to control the number of connections to the Dynamic Multipoint Virtual Private Network (DMVPN) hub and allows you to switch to alternate hubs in case of a connection failure to the primary hubs. https://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-backup-nhs.html#:~:text=The%20DMVPN%2DTunnel%20Health%20Monitoring%20and%20Recovery%20(Backup%20NHS),failure%20to%20the%20primary%20hubs.
Backup NHS, or Next Hop Server, is a feature of DMVPN Phase 3 that allows a spoke router to switch to an alternate hub when the primary hub is unreachable. This is accomplished by using a secondary IP address for the hub router, which is used as the next hop for any traffic sent by the spoke router to the hub.
NEW QUESTION # 80
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?
- A. virtual template
- B. Group Policy
- C. webvpn context
- D. IKEv2 authorization policy
Answer: B
NEW QUESTION # 81
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (webvpn-attributes)
- B. webvpn (global configuration)
- C. tunnel-group (general-attributes)
- D. webvpn (group-policy)
Answer: B
Explanation:
Section: Remote access VPNs
Explanation/Reference:
NEW QUESTION # 82
A network engineer must design a clientless VPN solution for a company. VPN users must be able to access several internal web servers. When reachability to those web servers was tested, it was found that one website is not being rewritten correctly by the ASA.
What is a potential solution for this issue while still allowing it to be a clientless VPN setup?
- A. Set up a smart tunnel with the IP address of the web server.
- B. Set up Cisco AnyConnect with a split tunnel that has the IP address of the web server.
- C. Set up a NAT rule that translates the ASA public address to the web server private address on port 80.
- D. Set up a WebACL to permit the IP address of the web server.
Answer: C
NEW QUESTION # 83
Why must a network engineer avoid usage of the default X.509 certificate when implementing clientless SSLVPN on an ASA?
- A. The certificate is too weak to provide adequate security.
- B. The certificate must be managed by the local CA.
- C. The certificate is regenerated at each reboot.
- D. The default X.509 certificate is not supported for SSLVPN.
Answer: C
Explanation:
By default, the ASA generates a self-signed X.509 certificate upon startup. This certificate is used in order to serve client connections by default. It is not recommended to use this certificate because its authenticity cannot be verified by the browser. Furthermore, this certificate is regenerated upon each reboot so it changes after each reboot. https://www.cisco.com/c/en/us/support/docs/security-vpn/webvpn-ssl-vpn/119417-config-asa-00.html
NEW QUESTION # 84
Refer to the exhibit.
The DMVPN spoke is not establishing a session with the hub. Which two actions resolve this issue? (Choose two.)
- A. Change the nhrp authentication key on the spoke to cisco123.
- B. Change the ISAKMP policy authentication on the spoke to pre-shared.
- C. Change the transform set to mode tunnel.
- D. Change the ISAKMP key address on the spoke to 0.0.0.0.
- E. Change the spoke nhs to 172.16.18.1 and the nbma to 10.0.0.1.
Answer: A,B
NEW QUESTION # 85
......
Cisco 300-730 exam is a vital certification that evaluates the skills and knowledge of networking professionals in implementing secure VPN solutions. 300-730 exam covers a wide range of topics, including VPN technologies, security solutions, and network operations. It is ideal for individuals who have practical and hands-on experience with Cisco VPN technologies and want to showcase their expertise in designing, configuring, and maintaining secure VPN solutions.
Certification dumps CCNP Security 300-730 guides - 100% valid: https://simplilearn.lead1pass.com/Cisco/300-730-practice-exam-dumps.html