2023 Latest C_IBP_2205 DUMPS Q&As with Explanations Verified & Correct Answers
C_IBP_2205 dumps Exam Material with 80 Questions
The SAP C_IBP_2205 certification is recognized globally and is highly valued by employers in the supply chain management industry. It demonstrates that you have the skills and knowledge required to work with SAP IBP for Supply Chain and can help you stand out in a competitive job market. Whether you are an experienced supply chain professional or just starting your career in this field, the SAP C_IBP_2205 certification can help you take your skills and career to the next level.
NEW QUESTION # 36
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.
- A. Target Cycle Stock
- B. Reorder Point
- C. Target Pipeline Stock
- D. Recommended Safety Stock
- E. Component Usage
Answer: A,C,D
NEW QUESTION # 37
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.
- A. Target inventory violation cost should be less than transportation cost rate.
- B. Target inventory violation cost should be less than max inventory violation cost.
- C. Target inventory violation cost should be greater than inventory holding cost rate.
- D. Target inventory violation cost should be greater than discount for demand lateness.
Answer: A,C
NEW QUESTION # 38
Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question.
- A. Activate Local Member Recognition setting is selected.
- B. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- C. Use Excel Cell References in Report Editor is selected.
- D. User should have authorization for template administration.
Answer: A,D
NEW QUESTION # 39
Which functional capabilities are included in SAP IBP for response and supply?Note: There are 2 correct answers to this question.
- A. Gating Factors
- B. Analyze Supply Usage
- C. Planning with Product Allocations
- D. Detailed Production Scheduling
Answer: A,B
NEW QUESTION # 40
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Users should have authorization for template administration.
- B. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
- C. Activate Local Member Recognition setting is selected.
- D. Use Excel Cell References in the Report Editor option is selected.
Answer: A,C
NEW QUESTION # 41
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Proportional disaggregation by using KF2 in the expression
- B. Disaggregation according to a user-defined expression
- C. An internal system-generated disaggregation
- D. Disaggregation in batch triggered by an application job
- E. Disaggregation according to an equal split
Answer: A,B,E
NEW QUESTION # 42
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Merge analytics and alerts into a new planning area from any sample planning area.
- B. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
- C. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- D. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
Answer: B
NEW QUESTION # 43
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. All process templates are assigned to dashboards.
- B. Each step depicted in the template can have tasks associated with it.
- C. The number of steps in a process template is the same for all implementations.
- D. New instances of templates allow for re-use of the same processes again.
Answer: B,D
NEW QUESTION # 44
Model configuration allows the attributes of a master data type to be assigned as key figures.Which features are relevant for this type of object?
- A. This type of key figure is not usually stored and it cannot be set to editable.
- B. This object is not exposed to the user in planning views or modeling.
- C. This object provides a single value for a unique planning combination.
- D. This object contains user-defined criteria that monitor the running of business plans.
Answer: C
NEW QUESTION # 45
Where can the results of a Time Series Analysis be used?Note: There are 2 correct answers to this question.
- A. In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
- B. During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
- C. In the Microsoft Excel add-in, where you can use them to limit and filter your planning views
- D. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV
Answer: A,B
NEW QUESTION # 46
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A special key figure marked as an aggregate key figure (aggregate constraint)
- B. A currency conversion key figure, such as exchange rate
- C. A unit of measure key figure, such as UOMCONVERSIONFACTOR
- D. A forecast metric key figure, such FCSTMAPE
Answer: A,C
NEW QUESTION # 47
Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.
- A. Planning unit
- B. UOM to ID
- C. Type of algorithm to use
- D. Target currency
Answer: B,C
NEW QUESTION # 48
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.
- A. SAP IBP for sales and operations
- B. DDMRP
- C. SAP IBP for response and supply
- D. SAP IBP for demand
Answer: A,C
NEW QUESTION # 49
You created a key figure and want to add calculations.Which of the following rules do you consider?Note:
There are 2 correct answers to this question.
- A. Key figures can be calculated across different planning levels.
- B. The calculation chain for a key figure must always result in a calculated key figure.
- C. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
- D. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
Answer: A,C
NEW QUESTION # 50
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Transportation Lead Time Error CV
- B. Minimum Lot Size
- C. Target Service Level
- D. Holding Cost Percentage
Answer: B,C
NEW QUESTION # 51
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type DECIMAL and assigned to a compound master data type
- B. Created as type INTEGER and assigned to a simple master data type
- C. Created as type INTEGER and assigned to a compound master data type
- D. Created as type NVARCHAR and assigned to an external master data type
Answer: A
NEW QUESTION # 52
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Unit of measure is an attribute of a master data type, such as Product.
- B. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
- C. Units of measure are usually not time-independent.
- D. Units of measure are usually not time-dependent.
- E. Analytics provide the user with the option to select the target unit of measure.
Answer: A,D,E
NEW QUESTION # 53
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. The result generates sensed demand data at the monthly time granularity for the full time horizon
- B. It is mandatory to load historical lag-based snapshot data.
- C. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
- D. Set up the forecast model to be executed at product-location level.
Answer: B,C
NEW QUESTION # 54
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.
- A. Global cost factors
- B. Discretization
- C. Processing mode
- D. Time profile level
Answer: A,C
NEW QUESTION # 55
You want to display and edit data in different Units of Measure (UOM).Which of the following must you consider before you use the UOM?Note: There are 3 correct answers to this question.
- A. Unit of measure is an attribute of a master data type, such as Product.
- B. Conversion to the target unit of measure is handled by SAP IBP Excel UI
- C. Units of measure are usually not time-independent.
- D. Units of measure are usually not time-dependent.
- E. Analytics provide the user with the option to select the target unit of measure.
Answer: A,D,E
NEW QUESTION # 56
Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP?Note: There are 2 correct answers to this question.
- A. Substitute Missing with Mean or Median in Sales History
- B. Bias Detection and Correction in Sales History
- C. Intermittency Detection and Correction in Sales History
- D. Promotion Sales Lift Elimination
Answer: A,D
NEW QUESTION # 57
......
The SAP C_IBP_2205 certification exam is an essential certification program for professionals involved in supply chain management, demand planning, and sales and operations planning. The certification program provides a comprehensive understanding of SAP IBP for Supply Chain and validates the candidate's expertise in implementing and configuring the software. Certified professionals can leverage their certification to enhance their career prospects and gain recognition within their organizations.
Share Latest C_IBP_2205 DUMP Questions and Answers: https://simplilearn.lead1pass.com/SAP/C_IBP_2205-practice-exam-dumps.html